Sectional Titles Act, 1986 (Act No. 95 of 1986)RegulationsSectional Titles Amendment Regulations, 20217. Field measurements |
| (1) | Measurements by a land surveyor or architect for the preparation of a draft sectional plan shall be made in the field to two decimal places of a metre and recorded, at the time of the measurement in the field, in the field book or on the field plan. |
| (2) | Sufficient measurements shall be made to enable all median dimensions to be calculated and checked, so as to be consistent with the dimensions of the building as a whole, and the sections and other details on the draft sectional plan to be correctly depicted. |
| (3) | The provisions of the Land Survey Act, 1927 (Act No. 8 of 1997), and the regulations made thereunder, shall apply to the manner in which and the accuracy to which the survey of buildings and exclusive use areas of which boundaries are not represented by physical features of permanent nature, shall be performed and to the manner and the form in which the records of such surveys shall be prepared and lodged with the Surveyor-General. |
[Regulation 7(3) substituted by Notice No. 830 dated 25 August 2000]